185
Alnasca Challenge 2025

Alnasca Challenge 2025

Alnasca Challenge 2025 – Knives, Axes and Adrenaline in the Magical Verzasca Valley

Have you ever thrown a knife in the silence of a Swiss valley, with your heart beating faster than the blade cutting through the air?
No? Then get ready to discover one of the most fascinating and adrenaline-filled events in Europe: the Alnasca Challenge 2025 , the international knife and axe throwing competition that transforms the quiet of the Verzasca Valley into an arena of precision, concentration and passion.

Imagine perfectly aligned wooden targets, athletes from all over Europe ready to test themselves, and that unique energy that arises when instinct merges with technique. This is not just about strength : it is about control, mentality and the art of gesture . It is a discipline, a ritual, a meeting between mind and blade.

In this post I take you behind the scenes of this breathtaking challenge: I’ll tell you what really happens on the field, who the protagonists are, why it’s worth being there (even just as a spectator) and how this event is growing a real culture of sports throwing in Europe.

If you are a knife enthusiast, a maker, a fighter or simply someone looking for authentic experiences, this reading is for you .
Lace up your boots… off to Ticino.

A celebration of sporting launch in a breathtaking natural setting

In the green heart of the Verzasca Valley , in the Canton of Ticino (Switzerland), one of the most anticipated events for sports launch enthusiasts returns: Alnasca Challenge 2025. The third edition of this international competition will be held during the Pentecost weekend , from Saturday 7 to Monday 9 June 2025 , along the banks of the river of the same name, in a setting that seems to have come out of an Alpine fairy tale.

🌍 An International Event for the Knife & Axe Throwing Elite

The Alnasca Challenge 2025 is not just any competition .
It is the European meeting point for the best throwers on the continent .
A natural arena where precision is measured in millimeters , adrenaline flows like the Verzasca River and every gesture tells of years of training.

Organized with passion and rigor by the Alnasca Throwing Knife and Axe association , the event will welcome delegations from all over Europe:
🇨🇭 Switzerland
🇮🇹 Italy
🇫🇷 France
🇩🇪 Germany
🇦🇹 Austria
🇳🇱 Netherlands
… and other countries, with athletes ready to challenge each other in tests of absolute control, mental coolness and pure mechanical ability .


🔪 The disciplines in competition

Each category is regulated by official internationally recognized standards , with technical scores and certified distances.
Participants will compete in:

  • 🪓 Single Axe Throw (Standard) – Controlled Power, Stable Trajectory

  • 🪓 Double-headed axe throw – symmetrical precision, complex rotation

  • 🗡️ Single Knife Throw – The Unforgiving Classic

  • 🔄 Combination rounds and accuracy tests – to test the versatility of the throwers

The competitions will be divided by distance , rotation technique (spin / no-spin) and type of weapon , so as to enhance each style and strategy.


🏹 Maximum transparency and technical quality

Each single test will be evaluated by an international panel of certified judges , with experience in official tournaments and technical training.
The targets – all in natural wood, positioned outdoors in regulation series – will offer real, clear and impartial competition conditions .

📏 There is no improvisation here. Every point counts.
And every mistake becomes a lesson for the next trajectory.


If you are part of the European knife & axe throwing scene…
you can’t miss it.


📅 Official Program – Alnasca Challenge 2025

Three days of action, technique and sportsmanship , immersed in the wild heart of the Verzasca Valley.
Each day is designed to offer the best, both for those who participate and for those who watch.


🔥 Saturday 7th June – from 9:30 am

🎯 Official opening of the tournament
🏁 Start of the individual eliminations and qualifications
📋 Technical control of the blades and regulatory briefing
👥 Meeting between the participants, warm-up, free practice
🌲 Perfect day for those who want to observe the first rounds and the different throwing styles up close


⚔️ Sunday 8th June – all day

🏆 Advanced knockout rounds
⏱️ Special competitions and timed challenges between the best throwers
🤝 Maker meetings, exhibitions and equipment tests
📸 Highlights for photographers, video-makers and visual storytelling
🔥 Atmosphere full of adrenaline and concentration


🏅 Monday 9th June – 3:00 pm

🎤 Official award ceremony
🥇 Announcement of the winners of all categories
📦 Closing of the tournament, greetings and thanks
📸 Final photos, interviews, farewell toasts
🚶‍♂️ Perfect moment to say goodbye to new friends and build bonds for the future


👉 Every day will be accompanied by food trucks, technical stands, a public area and a relaxation area. Bring what you need to be comfortable, take epic photos and – if you are an athlete – live every second as if it were the decisive launch.


📜 Official Rules – Alnasca Challenge 2025

👥 1. Participation

  • Athletes of legal age with proven experience in sport throwing may participate .

  • Advance registration is required by May 15, 2025.

  • Each participant must sign a liability waiver upon check-in.


🔪 2. Permitted equipment

  • Throwing axes and knives conforming to international standards are permitted .

  • Knives :

    • Length: minimum 23 cm – maximum 30 cm

    • Weight: minimum 200 g – maximum 350 g

  • Single axes :

    • Handle length : min. 30 cm

    • Head weight: 600–900 g

  • Two-pinnate leaves :

    • Maximum opening between blades: 30 cm

    • Max total weight: 1.5 kg

  • The blades will be checked and approved by the technical judges before accessing the field.


🏹 3. General competition rules

  • Each athlete will have 3 tests per round , on separate targets.

  • Scores range from 1 to 5 depending on the area affected (bullseye = 5).

  • No stick = 0 points , regardless of rotation.

  • Categories will be divided by weapon type , distance and technique (e.g. spin / no-spin).

  • The throw must be made from behind the shooting line marked on the ground.

  • In case of a tie in the final rounds: 1-shot spare round.


⚠️ 4. Safety and Behavior

  • The use of damaged or untested blades is prohibited .

  • Athletes must wait for the judge’s approval before retrieving their blades.

  • Closed shoes and appropriate technical clothing are mandatory.

  • Access to the field with alcohol or mind-altering substances is prohibited.

  • Anyone engaging in aggressive, provocative or dangerous behavior will be disqualified immediately .

  • The organization reserves the right to exclude anyone who does not respect the rules or creates disturbances.


👨‍⚖️ 5. Judgment and complaints

  • The decision of the official judges is final .

  • Any objections must be submitted within 10 minutes of the end of the round , in writing.

  • An arbitration commission is foreseen for exceptional cases.


🎯 6. Ranking and prizes

  • Scores will be recorded digitally and published in real time.

  • Prizes are awarded to the top three in each discipline .

  • Honorable mention for:

    • Best technique

    • Athlete revelation

    • Higher performing handcrafted blade


📌 NB: This regulation may undergo minor changes up to the date of the event. The final version will be delivered to all registered participants via email and printed on site.


🔥 A Unique Opportunity for Professionals, Enthusiasts and Sharp Spirits

The Alnasca Challenge 2025 is not just a sporting competition .
It is a modern tribal call , a moment when skill, passion and identity intertwine under the same sky.

Whether you are:

🗡️ A competitive athlete who experiences every throw as a ritual of precision and mental mastery…
🔧 An artisan knife maker , eager to see your blade truly “speak” in the hands of the person using it…
📜 A scholar of the history of edged weapons , fascinated by the ancient gesture of throwing as an art form…
🌲 A lover of the outdoors and bushcraft , who wants to breathe adrenaline among the trees…

👉 Here you find home. And you find others like you.

Because Alnasca is more than an event :
It is a community that meets , exchanges ideas, measures itself, improves.
It is an opportunity to inspire each other , question ourselves and return home with a sharper blade… and also with a clearer vision .

📍 It doesn’t matter where you come from. It matters how you shoot. And what you put into it.


🎯 Why Participate or Attend the Alnasca Challenge 2025?

Because it’s not just a race.
It’s an experience. A ritual. A total immersion in nature, technique and community spirit.
This is what makes the Alnasca Challenge something unique :


🥇 To compare yourself with the best European throwers

It’s not every day that you can measure yourself against the elite of sport throwing. At Alnasca there will be international champions, cutting-edge techniques, styles from all over Europe . Whether you want to learn, challenge or just observe: here you breathe competence and true passion .


🌀 To discover disciplines that (perhaps) you have never seen live

Have you ever seen a perfectly planted double-headed axe throw at a competition distance?
Have you ever heard the sharp sound of a knife hitting the center with the tip? This is the opportunity to experience the physics and elegance of the technical gesture
up close , much more than a scene from a movie.


🤝 To meet the community: makers, instructors, athletes and enthusiasts

Here you don’t just throw to win: you throw to share .
Alnasca is also networking, chats between throwers, exchanges between artisans , testing of materials, photos, advice, future collaborations.
Whether you are a knife maker , a coach or a simple practitioner: you will never be a stranger .


🌲 To enjoy a weekend in the wildest and purest nature of Italian Switzerland

The Verzasca Valley will get inside you. Turquoise water, prehistoric rocks, the scent of the forest.
Camping, taking pictures, breathing deeply while you witness an ancestral discipline transformed into a modern sport: a weekend that regenerates, entertains and inspires .


💡 In short:

If you love the knife, the challenge, the environment or the humanity behind every gesture… you have to be at Alnasca.

🌄 Location – The Wild and Poetic Verzasca Valley

There are places that seem to have been designed specifically to host extraordinary events . The Verzasca Valley is one of these.
Nestled between the mountains of the Canton of Ticino , in Switzerland, this valley is a corner of the world where nature and silence meet to tell an ancient story . That of an emerald-colored river, of medieval stone bridges , of woods that smell of resin , and of paths that seem to have come out of an Alpine legend.

💧 The Verzasca River – famous for its crystalline and turquoise waters – flows right next to the competition field. A pure, powerful and primitive frame , which amplifies every gesture, every breath, every shot that lands.

🎯 The shooting range is located outdoors , in an area equipped with:

  • Natural wooden targets , handcrafted

  • Demarcated and safe shooting lines

  • Shaded areas for athletes and spectators

  • Support points for technical material

🌲 Here, the throw becomes ritual.
Every rotation of the blade is reflected in the surface of the river.
Every silence before the throw is filled by the sound of the wind in the leaves.
Every stick that hits the target is more than a point : it is an agreement with the environment .

📸 And yes, every corner is perfect for a postcard (or Instagram) photo.


🧭 Practical Info – Alnasca Challenge 2025

🎟️ Event open to the public
✔️ Free entry for visitors and companions
✔️ Safe and accessible spectator area
✔️ Ideal for enthusiasts, families, makers, and the curious

⛺ Available services
✔️ Possibility of free camping near the competition field
✔️ Presence of food trucks , refreshments and drinks
✔️ Technical and exhibition stands with handcrafted blades, throwing equipment, outdoor clothing and merchandising

🔪 Dedicated exhibitor area
✔️ Space reserved for knife makers, manufacturers of axes and sporting knives, throwing schools, outdoor brands
✔️ Networking opportunities, demonstrations and direct sales
📦 If you want to exhibit: write now to reserve your stand!

📬 Contacts for info, registrations and reservations
🌐 Official website → alnasca.ch
📧 Email → info@alnasca.ch


📌 NB: the field will be marked with GPS coordinates a few days before the event. Technical clothing and logistical autonomy are recommended.


🔧 Considerations from an Instructor and Knife Maker – The Event as a Truth Revealer

I speak as someone who, like you perhaps, experiences the knife not only as an object, but as an extension of the body and a reflection of the mind .
As a knife maker , every blade I make carries with it a responsibility: to work when it really counts . Not on the display bench, but in the field , under the rain, the tension and the passing of time. And it is precisely at events like the Alnasca Challenge that everything is revealed.

Every launch is a test of geometry and soul :

  • Is the thread holding?

  • Does the balance behave as expected under real rotation?

  • Does the material respond well after dozens, hundreds of impacts?

  • Can the engineered grip hold up to sweat and racing pressure?

🧪 In no other context can you get such honest feedback.

As an instructor , however, I see the competition as a living laboratory of applied biomechanics and self-control .
Sport throwing is not brute force, but a dance of precision : posture, alignment, release, breathing.
Each athlete must compete not only against the target, but against his own ego.
💭 Here you don’t win if you’re aggressive: you win if you’re centered.

I teach that you don’t throw a knife: you release it .
That you don’t need muscle: you need rhythm .
That it doesn’t matter to act tough: it matters to master internal tension.


📍 The Alnasca Challenge is not just a competition. It is a moment of truth.
For those who shoot. For those who teach. For those who build. For those who watch in silence… before hitting the mark.


🔍 Curiosities from the World of Throwing – Between History, Records and Legends

Although knife and axe throwing is now a codified sport, its roots are ancient, mysterious and often surprising . Here are three curiosities that you may not have known:


🥇The world record for precision knife throwing

Do you know what the official world record is for the number of knives thrown accurately within one minute?

👉 It is 102 knives in 1 minute , all planted on valid targets, and was set by David Adamovich (aka The Great Throwdini ), one of the most famous American knife throwers, also known for his speed in trick shots and for his stage shows.
His style combines surgical precision, timing and rhythm management – ​​all crucial skills even in the context of modern competition.


🌀 Who invented the modern no-spin throw?

Il lancio no-spin – cioè quello in cui il coltello vola senza ruotare, mantenendo la punta in asse – è considerato da molti come la tecnica più difficile e “marziale”.
Ma chi lo ha sistematizzato?

📍 Il merito va a Ralph Thorn, praticante americano di arti marziali e autodifesa urbana, che negli anni ’90 ha sviluppato il sistema “Combat Knife Throwing”.
Il suo metodo era pensato per l’applicazione reale a corto raggio, come tecnica difensiva o di distrazione, e prevedeva grip non convenzionali, biomeccanica intuitiva e utilizzo in movimento.

Oggi il no-spin è popolarissimo tra gli sportivi più avanzati e nei tornei con categorie dedicate.


⚔️ L’arma da lancio preferita dai Vichinghi? Spoiler: non era l’ascia.

Contrariamente al mito popolare (e alle serie TV), l’ascia non era l’arma da lancio preferita dai Vichinghi.

👉 Il titolo spetta al “francisca”, una particolare ascia da lancio bilanciata, usata dalle tribù germaniche e dai Franchi, poi adottata anche dai Vichinghi come arma da impatto a distanza ravvicinata.

La francisca aveva una testa curva e un equilibrio particolare che le permetteva di rimbalzare o deviare dopo l’impatto, creando confusione nel nemico prima del corpo a corpo.
Era un’arma tanto strategica quanto psicologica. Un precursore del concetto moderno di “shock and awe”.


🎯 Il mondo del throwing è molto più di “colpire un bersaglio”: è cultura, storia, biomeccanica e mentalità. Più conosci le sue origini, più affilata sarà la tua traiettoria.


🔍 Mini-Glossario Tecnico del Lancio Sportivo di Coltelli e Asce

Per chi è alle prime armi (o anche solo curioso), il mondo del lancio di coltelli e asce può sembrare pieno di termini strani. Ecco una guida rapida e chiara ai concetti fondamentali:


🗡️ Stick

Definizione: Quando la lama (coltello o ascia) si pianta con successo nel bersaglio.
Nota: Non tutti gli “stick” valgono punti; dipende dall’angolazione, dalla profondità e dalla zona colpita.
👉 “Il mio lancio era perfetto: doppio stick nel kill zone!”


🔄 No-spin / Half-spin / Full-spin

Definizione: Tecniche di lancio basate sulla rotazione del coltello durante il volo.

  • No-spin: Il coltello non ruota, vola dritto e impatta con la punta.

  • Half-spin: Una rotazione di circa 180°, usata per distanze brevi.

  • Full-spin : A full rotation (360°), used at regulation distance.
    👉 “For close-range targets I prefer the no-spin: faster, more precise.”


⚖️ Blade-heavy / Handle-heavy

Definition : Referring to the balance of the blade , that is, where the weight of the tool is concentrated.

  • Blade-heavy : The blade weighs more than the handle → faster rotation

  • Handle-heavy : The handle weighs more → slower rotation, more control
    👉 “For full-spin throwing I choose a blade-heavy knife, it spins better.”


🎯 Kill Zone

Definition : The center area of ​​the target, usually circular and with the highest scoring.
Synonym : center, bullseye
👉 “Three hits in the kill zone = a perfect round!”


📏 Stance

Definition : The position of the body and feet at the moment of throwing.
Variations : parallel, oblique, open, closed
👉 “A solid stance is essential for accuracy.”


📐 Rotation Distance

Definition : The distance from which you throw with a given spin (e.g. full-spin ≈ 3-4 meters).
👉 “If you are too close or too far away, the spin doesn’t close and you don’t stick.”


✋ Grip

Definition : The way you hold the blade. There are different grips depending on the technique (no-spin, hammer grip, pinch grip, icepick).
👉 “A good grip is half the battle: no effective throw without control.”


🕳️ Bounce-out

Definition : When the knife hits the target but bounces instead of landing.
👉 “Beware of bounce-outs! Zero points and safety risk.”


🧠 Final tip : If you are new to this world, reread this glossary before each session. Knowing the terms allows you to communicate better, learn faster and enjoy the experience more.


🛒 Where to Buy Approved Throwing Knives – A Guide for Athletes and Enthusiasts

One of the first obstacles for those approaching the world of sport knife throwing is precisely this: finding throwing knives that are reliable, balanced and, above all, approved for official competitions .

👉 Not all “throwing” knives sold online are suitable for competitions: many are unbalanced, too light, with decorative geometries or built with materials unsuitable for intensive use.

Here is a selected list of retailers, manufacturers and brands where you can buy blades certified, tested and approved by professional throwers and European federations .


🔧 Recognized Brands and Producers

🔪 Cold Steel

  • Modelli consigliati: True Flight Thrower, Perfect Balance, Sure Balance

  • ✅ Sturdy, durable, great balance for full-spin

  • 📎 coldsteel.com

🪓 FlyingSteel

  • Modelli: Thorn, Shuriken Pro, Big Balance

  • ✅ Technical design, durable steel, widely used in competition

  • 📎 flyingsteel.com

🗡️ Smith & Wesson Throwers

  • Serie Bullseye e SWHRT9B

  • ✅ Cheap, good for beginners, used in training

  • 📎 Available on Amazon , KnifeCenter

🛠️ Italian artisan makers

  • Scintilla Cutlery (RE) – Custom blades for throwers, even personalized

  • Piccardi Cutlery (PI) – Models tested by Italian athletes

  • Forgia Vulcano (online + fairs) – Custom projects for technical launch
    👉 Contact them via social or events for specific racing models


🛒 Recommended sites for online shopping

✅ ThrowingZone.com

  • Specializing in throwing knives, axes and competition gear

  • Shipments to Europe, wide choice of approved blades

✅ Knifewarehouse.co.uk

  • Great assortment of budget and medium throwing knives

  • Fast shipping to Italy and EU

✅ KnifeCenter.com

  • Global catalog with technical reviews

  • International Shipping, Large Selection Cold Steel

✅ [Aliexpress + Amazon (with caution)

  • Only from sellers with high feedback

  • Check weight, dimensions and type of balance


📏 How to recognize an approved throwing knife

  • Minimum weight: 200 g (official competition)

  • Length: 23–30cm (international standard)

  • Unsharpened blade , sturdy tip

  • Symmetrical or slightly blade-heavy design

  • Hardened steel , monobloc, without fragile decorations

  • Without rubber grips or bumpers (prohibited in competition)


🎯 Pro tip from instructor:
Buy in sets of 3 or 6 , identical. Always train with the same geometry to improve consistency and muscle memory .


🗡️ Comparison Table – Approved Throwing Knives

 

Model Lung. cm Weight g Balancing Type Price € Pro Against
Cold Steel True Flight 30.5 270 Blade-heavy Full-spin 45 Solid, great for starting out A little light for long rotations
Cold Steel Perfect Balance 33.0 340 Handle-heavy Full-spin 55 Powerful, excellent penetration Requires technical inspection
FlyingSteel Thorn 28.0 250 Balanced No-spin 85 Precise, ideal for advanced no-spin High price
FlyingSteel Big Balance 32.0 320 Balanced Full-spin 95 Excellent grip, high durability Not for beginners
Smith & Wesson Bullseye 20.0 210 Central Training 30 Cheap, good for beginners Non-competitive balancing
Scintilla Cutlery – Custom Pro 29.0 300 Balanced Custom da gara 90 Perfect for competition, treated steel High price, waiting times
Piccardi Cutlery – Race 27.0 290 Blade-heavy standard rates 80 Tested in Italian tournaments Limited availability
Forgia Vulcano – Handcrafted Thrower 30.0 310 Balanced Artisanal 100 Handmade, customizable High price, made to order

🌍 Beyond Alnasca – The Best Knife and Axe Throwing Events in Italy and Europe

If the Alnasca Challenge is the beating heart of knife throwing in Switzerland, the European calendar is full of events that deserve attention. Competitions, fairs, technical meetings and open days dedicated to the culture of throwing: a growing universe, made of precision, technique and sharing.

Here are the main events to mark on your 2025 calendar:


🇮🇹 Events in Italy

🔪 Italian Championship AND – Carpi (MO)

📅 Approximate date : October 2025
📍 Location : Carpi, Emilia-Romagna
🎯 Organization : Compagnia del Coltello
📌 Focus : Official point-based competition with European delegations
📎 Info: facebook.com/compagniadelcoltello


🏹 Game Fair Italy – Grosseto

📅 April 25–27, 2025
📍 Location : Centro Fiere, Grosseto
🎯 Focus : Demo of knife throwing, archery, axes, crossbow
📌 For families and outdoor enthusiasts
📎 Info: gamefairitalia.it


🎯 3K System Courses and Competitions – Terni

📅 Continuous activity all year round
📍 Location : Terni (Umbria)
🎯 Focus : Technical training, local events and micro-tournaments
📎 Info: lanciacoltelliedasce.com


🇪🇺 Events in Europe

🇨🇿 Grand Prix W Club – Kamenice, Czech Republic

📅 June 7, 2025
🎯 Focus : Western Target Competition, Throwing Sport and Freestyle
📎 Info: knifethrowing.info


🇬🇧 UK Double Bit Championship – Thirsk, Regno Unito

📅 June 7, 2025
🎯 Focus : Nordic-style double-bladed axes, rotating events
📎 Info: EuroThrowers UK Chapter


🇩🇪 Asgard Cup – Laubach, Germania

📅 June 19–22, 2025
🎯 Focus : High intensity tournament for expert throwers
📎 Info: knifethrowing.info


🇨🇭 Swiss Double Axe Championship – Orges

📅 30–31 August 2025
🎯 Focus : National competition, international standard rules
📎 Info: Alnasca & Throwers Community Switzerland


🔗 Useful resources for following events


📌 Practical advice : If you want to participate in multiple events, create your own personal “blade tour”. Some athletes plan the entire season just like in motorcycling or BJJ, following the most prestigious stages to grow technically… and socially.

🎯 Every event is an opportunity to test your blades, learn new styles, build connections, and take your throwing to the next level.


🎯 Conclusion – The Alnasca Challenge 2025 awaits you

The Alnasca Challenge 2025 is not just an event for hardcore throwing enthusiasts : it is much more. It is an international meeting point , where precision merges with adrenaline, where technique is refined on the field and where the community grows target after target.
In an era of distractions and disposable sports, here you will find an ancient gesture made into a modern sport , made of concentration, respect, contact with nature and real sharing.

🔪 Here the knife is not a weapon, but an extension of the body.
🪓 The axe is not a threat, but an instrument of discipline.
🌲 The valley is not just a setting, but part of the ritual.

If you are a practitioner, a maker, an athlete or simply someone looking for a real experience – outside the plastic of the screens and inside the wood of the targets – then this event is for you.

📍 Mark the date. Prepare the blade. Live the experience.
Because the Alnasca Challenge is not told. It is lived.

👉 We are waiting for you in Valle Verzasca, from 7 to 9 June 2025 .

Are You Experience?!

Andrea

FAQ – Frequently Asked Questions about the Alnasca Challenge 2025


1. What is the Alnasca Challenge?

The Alnasca Challenge is an international knife and axe throwing competition , now in its third edition. It takes place in Valle Verzasca (Canton Ticino, Switzerland) and is organized by the Alnasca Throwing Knife and Axe association. It brings together expert athletes from all over Europe, with the aim of promoting the discipline and culture of sport throwing.


2. When will the 2025 edition take place?

The competition will take place from 7 to 9 June 2025 , during the Pentecost weekend:

  • Saturday 7th June : opening, reception and first rounds of competition (from 9:30)

  • Sunday 8th June : Advanced stages and special challenges

  • Monday 9th June : finals and awards ceremony (at 3pm)


3. Where exactly does it take place?

The event is held outdoors , in the wooded area along the Verzasca River. The exact address and GPS coordinates will be published on the official website alnasca.ch a few days before the event, along with an interactive map to facilitate arrival.


4. Who can participate in the competition?

Eligible participants:

  • Professional athletes and experienced amateurs

  • Official Launch Club Members

  • Launchers certified by national or international associations

This is not an event for absolute beginners: experience, regulatory equipment and compliance with international regulations are required .


5. Is it necessary to register in advance?

Yes. Registrations must be made by May 15, 2025. Simply send an email to info@alnasca.ch or register via the form on the website. Places are limited and last-minute registrations on site are not possible.


6. Is it possible to attend as an audience?

Absolutely! The event is open to the public and free of charge . There is a secure spectator area where you can watch all the trials, take pictures, talk to the participants and experience the unique atmosphere of the sporting throw.


7. Is this a dangerous event?

No, it is not dangerous . The organization follows a strict safety protocol , with delimited areas, control staff, first aid equipment and regulated access. The launches take place in independent shooting lines , with controlled rotations.


8. What disciplines are in the competition?

The main disciplines are:

  • Knife throwing at regulation distance

  • Standard Axe Throw (One Blade)

  • Double-headed axe throw

  • Precision rounds and timed challenges

  • Mixed races with quick weapon and distance changes


9. Can I bring my own blades?

Yes, if they comply with the international regulation (size, weight, balance). Otherwise you can use those provided by the organization. Personal weapons will be checked during the technical check-in on Saturday morning.


10. Will there be an exhibition or maker area?

Yes. There will be an area dedicated to exhibitors , especially craftsmen, custom knives, throwing equipment, merchandising and training. If you are a maker and want to exhibit or sell your products, contact the organization to reserve a space.


11. Can I camp in the area?

Yes, near the race course there are green areas equipped for free camping , as well as B&Bs and refuges nearby. Bring outdoor equipment, technical clothing and rain protection , because the weather in the valley can change quickly.


12. Is the event suitable for families and children?

Yes, even though it is a competition with throwing weapons, the public area is protected and safe . Children cannot actively participate , but they can watch and learn about this fascinating and educational sport.


13. Where can I find updates and results?

On the website alnasca.ch and on the event’s social channels. During the weekend, the following will be published:

  • Real time results

  • Provisional rankings

  • Official photos and videos

  • Interviews and behind the scenes


14. Is it possible to train before the event?

No, the field will be available only starting from Saturday morning . Athletes can train in their clubs or centers, respecting the distances and rules indicated. Some teams organize pre-event mini-camps , especially in the surrounding areas (info on request).


15. Can I participate as a volunteer or photographer?

Yes, it is possible to be part of the staff as a volunteer or to be accredited as a photographer/videomaker . Write to media@alnasca.ch with your profile, portfolio and availability. The event is looking for passionate, precise and responsible people.


16. What happens in case of bad weather?

The event takes place even in rain . Only extreme conditions (strong storms or safety risks) can lead to temporary interruptions. Bring technical clothing and waterproof covers to face any eventuality.


Like it? Share with your friends!

185
Andrea F

🔪 Knife Maker • Ingegnere • Blogger Sono un knife maker e appassionato di coltelleria artigianale con background ingegneristico. Progetto e realizzo coltelli cercando il punto d’incontro tra funzionalità, precisione, materiali, processi produttivi e design. Su Coltellimania condivido esperienza pratica e approfondimenti tecnici su knife making, acciai, trattamenti termici, molatura, affilatura, materiali per manici, attrezzature da laboratorio, CNC, laser e stampa 3D applicata alla coltelleria. Il mio approccio nasce dall’unione tra artigianato e tecnologia: non mi interessa soltanto mostrare un coltello finito, ma capire e spiegare come viene progettato, costruito, lavorato, testato e migliorato. 🥋 La mia esperienza nella difesa personale, nelle arti marziali, negli sport da combattimento e nelle Filipino Martial Arts completa il mio punto di vista sul coltello come oggetto tecnico, utensile e strumento progettato attorno a ergonomia, controllo, presa, movimento e funzione. Knife Making • Materials • Tools • Workshop Technology Others show the knife. Coltellimania explains how it is designed, made, finished and improved.

0 Comments

Your email address will not be published. Required fields are marked *